Automatic busbar inspection line / Busduct high voltage tester / Busway testing machine
Automatic inspection machine is composed of three parts, feeding positioning station, inspection station and discharge station. When the busbar enters the feeding position, the control system will select the right testing fixture to start testing from the information identified by bar code or previous assembly line. Three tests will be performed including HV withstanding test, insulation resistance test and grounding test. After test is finished, testing report will be generated. This report can be saved, printed on site and recorded remotely. Its format can be set according to customer's requirements. Automatic inspection machine is mainly used for batch inspecting on the straight busbar. Elbow busbar type shall be tested on manual inspection machine.
The automatic busbar inspection line adopts high voltage for busbar voltage and insulation resistance testing.
Specification:
1. suitable for straight compact busbar 630A~2500A, single layer, length 1.5~6m
2. working efficiency: 3min/piece
3. length of inspection line: 12m
Configurations:
1. One set of automatic patching machine;
2. One set of automatic inspection instrument;
3. One set of busbar automatic inspection electrical control system
Features:
1. Automatic end stop structure to align the busbar trunking system;
2. Automatic patching machine for busbar of different phases;
3. Automatic moving, testing and reporting
4. Testing data can be read on computer and printed out;
5. Custom and warranty available;
| Busbar phase and wire |
3P5W\3P4W\3P3W |
| Busbar length |
1.2~6m |
| Nos of inspection fixtures |
3 pieces |
| Housing dimension |
L13.5(18)*W0.8*H0.8 m |
| Control mode |
PLC or barcode |
| Inspection content |
Voltage resistance, insulation, grounding |
| Transformation mode |
Internet transform, USB |
| Voltage |
380/415V AC 50/60Hz |
| Total power |
4kW |
| Air source |
0.6MPa |
Manual inspection machine
1. Application for elbow busbars, flange end busbar, straight busbar less than 1m.
2. All the testing data can be recorded on the control system.
Audited Supplier 
){kind=link}