Semi-Automatic Compact Busbar Trunking System Production Line

• After-sales Service: 24-Hour Online Service
• Warranty: 1 Year, One Year
• Automation: Automatic, Semi-Automation
• Suitable for: Alloy, Aluminum
• After-Sales Service: 24-Hour Online Service
• Transmission Type: Flexible
• Model NO.: KDEQ-01-018
• Automatic Production Line: Assembly
• Certification: ISO
• Flexible Production: Intelligent Manufacturing
• Rhythm: Flow Production Line
• Production Scope: Product Line
• Transport Package: Plywood Case
• Specification: 18000mm*800mm*800mm
• Trademark: Kiande
• Origin: China
• HS Code: 847981900
• Production Capacity: 6 Sets Two Months

Product Description

Busbar semi-automatic reversal assembly line / Busbar Production Line for busway system / Compact busduct manufacturing line

Semi-automatic assembly line is composed of three parts, pre-assembly station, automatic reversal station and accessory assembly station.
Pre-assembly station: Operators will pre-assemble and fix busbar main parts by the fixtures and transfer the busbar to the automatic reversal station manually.
Automatic reversal station: When busbar arrives in the reversal station, operator shall fix the busbar by clamp and start riveting on one side. After one side is done, rotators will be reversed 180 degrees for other side's riveting.
Accessory assembly station: After busbar is riveted, operator will assemble the busbar accessories at this station.


Specification:

No.	Parameters
Model	KD-ZDX/H-4-6(4.5)
Max. Busbar Height	330mm (Single Layer)
Max. Busbar Length	6000mm
Working Efficiency	Around 3000mm/4min
Riveting Machine	Not included
Rotator Nos	4 sets (standard)
Length of Reversal Part	4500mm
Manual Lifting Fixture Nos	3 pieces
Manual Operation Station Length	1500mm
Hanger Material	Aluminum hanger
Riveting Type	Manual riveting
Power	380~415VAC  50~60Hz  5kW
Equipment Dimension	L18000mm*W800mm*H1900mm

1. Suitable for straight compact busbar 630A~2500A, single layer, length 1.5~6m
2. Automatic end alignment, clamping and moving controlled by PLC
3. Manual riveting: two pieces or four pieces riveters depending on customer's busbar type (two piece requires one piece riveter or four piece requires two pieces riveters);

Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suitable for busbar with width 74.5mm-350mm.
3. The electrical control system can clamp at the same time or separately.
4. The semi-automatic busbar assembly line is a cost-effictive production line and more stable which can decrease the NG rate and labour cost and increase the working efficiency.
5. The clamping is powered by air compressor 5-8MPA, which only comsumes the air when operation and is more environment-friendly comparing with the electrical comsumption of oil pressure.


We are the company specialized in busbar machine.Busbar machine means busbar production machine or busbar processing machine including mylar sleeve forming machine, busbar assembly machine, busbar riveting machine, busbar testing & inspection machine, busbar packing machine and busbar conveying machine. If you want to know how we use the machine to assemble the busbar, please kindly get the referenced pictures as below.
 
Step 1 Prepare all busbar finished components
 
Step 2 Use related busbar machines to process the busbar
 
Busbar machine copper processing
Need Kiande's busbar gas-hydraulic copper bar punching machine(This is one-time punching forming. In the market, some busbar manufacturer buys three-in-one busbar machine to bend and punch copper or aluminum bar. As the bar experiences many procedures, the accuracy is not good which will cause the phase distance too small to cause the short circuit.)

Busbar machine mylar sleeve processing machine polyester film forming machine
Need Kiande's mylar/polyester film forming machine. In the market, some busbar manufacturer requests workers to wrap the bar manually. Different workers have different workmanship. If employer meets the inexperienced workers, the wrapping part will have some gaps which will cause the short circuit.

Busbar machine busbar accessory 3M insulation film Conductor(Copper bar/Aluminum bar) end wrapping

Busbar machine busbar accessory Aluminum profile capped casting capped end

Busbar machine Busbar riveting machine

Busbar machine busbar inspection machine busbar testing machine

Busbar machine busbar packing machine busbar packaging machine
Busbar machine busbar accessory rivet the rivet is to connect the profiles instead of bolts more stable and strengthen

Busbar machine busbar accessory joint isolator